• Apprentice
    22 Sep 2010, 2:26 a.m.

    Hi,

    I am interested in the PPC. Can I know for current owners, what is the accuracy of the watch? The spec is +0/10sec per day?

    Thanks!

  • Master
    22 Sep 2010, 3:14 a.m.

    I'm not sure where you got your spec for the PPC. I am certain it's not 0 to +10. I believe it's -4 to +6. My PPC runs about +3 sec per day for over three years now. More importantly, it is consistent, which to me is more important than the + / - deviation.

    I expect the experts will correct me, if I have the spec wrong.

  • Master
    22 Sep 2010, 6:56 a.m.

    Great idea on the PPC. I have had my 5022 Portuguese Perpetual now for over 4 years, and my ref 5021 for 3+ years - they both are very consistent. It's been over 3 years since I have cared to track the deviation. These watches are adjusted and monitored before leaving the factory to a tolerance of 0+5 seconds (never slow). My 5022 was +5 secs per day (3 years ago when I last tracked) and compared to only +3 for the slower beat 5021 (which was lucky surprise to me).

    Given the beauty and complicated engineering - I find myself looking at these watches quite often, but failing to note what time it is....

  • Master
    22 Sep 2010, 7:10 a.m.

    Yes, I know, and it gives you an excuse to look again, and then yet again just for the fun of it.

    Kind regards,
    Paul, on post 2400: Isobars might like this

  • Master
    22 Sep 2010, 7:21 a.m.

    I think I have come to the conclusion that pinpoint accuracy with respect to time is irrelevant as long as you are within about 4 seconds a day. I always make adjustments when the end of a month requires a date change, but in this case you would not have that ability since the watch is perpetual. So it depends on your own tolerance for deviation from actual time.

  • Connoisseur
    22 Sep 2010, 7:38 a.m.

    By the way, I had thought IWC's specifications were 0 to +8 seconds/day, and never slow. But also I wouldn't lose sleep if my watch was -1 or +9 seconds/day. It really has no material affect on life, and I would ask for fine-tuning when the watch had it's next regular service.

  • Master
    26 Sep 2010, 3:24 a.m.

    I agree with MF - as long as it "ticks" well and is not loosing time - I would not do anything until the first / next regular service.

  • Connoisseur
    4 Oct 2010, 8:11 a.m.

    Mine was purchased on December 2009 and was +12 seconds fast per day. I recently had to send it to IWC for an issue. They regulated the movement and it now runs +2 seconds per day - just right!